vvvvvvvvThe Wavlink WL-WN579X3, also known as the Wavlink Wing 12M Setup, is a compact and efficient device designed to boost wireless signals and extend the range of your WiFi network. With its user-friendly setup, users can easily enhance their WiFi coverage by plugging the extender into a power outlet and following a simple installation process. The Wavlink Wing 12M supports dual-band connectivity, allowing it to work seamlessly with both 2.4GHz and 5GHz WiFi networks. Equipped with features like WPS for quick setup and multiple operating modes, this WiFi extender provides flexibility to adapt to various networking needs. Its sleek design and reliable performance make the Wavlink Wing 12M a practical solution for improving WiFi coverage in homes and small offices.
Wavlink 12m extender Setup using manual method
Here’s a very easy and short step guide for setting up the Wavlink WL-WN579X3 (Wavlink 12M) WiFi extender using the manual method:
- Plug the Wavlink 12M extender into a power outlet near your existing WiFi router.
- Wait for Power LED:
- Wait for the Power LED on the extender to become stable, indicating that the device is powered on and ready.
- On your device (phone, laptop, etc.), go to the WiFi settings and connect to the default WiFi network broadcasted by the extender (e.g., “Wavlink_EXT”).
- Open a web browser (Chrome, Firefox, Safari) on your connected device.
- Enter Extender’s IP Address:
- In the address bar, type the default IP address of the extender, often “192.168.10.1,” and press Enter.
- Enter the default login credentials. These are typically “admin” for both the username and password. Check the extender’s manual for confirmation.
- Follow the on-screen instructions to configure the extender settings. You may need to select your existing WiFi network, enter its password, and set up the extended network.
Note:- If you need any assistance regarding your Wavlink Wing 12M wifi extender so get in touch with our technician or visit the official website that is ap.setup.
How to setup wavlink wing 12m via wps?
Here’s a very easy and short step guide for Wavlink Wing 12M WiFi extender setup using the WPS (Wi-Fi Protected Setup) method:
- Plug the Wavlink Wing 12M extender into a power outlet near your existing WiFi router.
- Locate the WPS button on the extender. Press and hold the WPS button for about 5 seconds until the WPS LED starts blinking.
- Within 2 minutes, press the WPS button on your existing WiFi router. This initiates the WPS connection process.
- Allow the extender and the router to establish a WPS connection. This may take a minute or two.
- Look for the WPS LED on the extender. Once it becomes solid or stops blinking, the WPS connection is successful. Your Wavlink Wing 12M extender is now set up and extending your WiFi network.
How do i login wavlink wing 12m range extender?
Here’s a very short and simple 6-step guide for logging in to the Wavlink WL-WN579X3 (Wavlink Wing 12M) range extender:
Ensure your device is connected to the WiFi network extended by the Wavlink Wing 12M extender.
Launch a web browser on your connected device (e.g., Chrome, Firefox, Safari).
Enter the Extender’s IP Address:
In the address bar, type the default IP address for Wavlink extenders, often “192.168.10.1,” and press Enter.
You should be redirected to the login page of the Wavlink extender.
Enter the default login credentials. These are typically “admin” for both the username and password. Check the extender’s manual for confirmation.
After entering the correct login credentials, click on the “Log In” or “Sign In” button. You should now have access to the Wavlink Wing 12M extender settings.
Firmware update for wavlink wing 12m extender?
To update the firmware on the Wavlink Wing 12M extender, you generally need to follow a process similar to the following steps:
- Ensure that your device is connected to the WiFi network extended by the Wavlink Wing 12M extender.
- Launch a web browser on your connected device.
- In the address bar, type the default IP address for Wavlink extenders, which is often “192.168.10.1,” and press Enter.
- Enter the login credentials. The default username and password are typically both set to “admin.” Refer to the extender’s manual for confirmation.
- Navigate to the settings menu and look for a section related to firmware or software updates. This may be labeled as “Firmware Update” or something similar.
- Download and Install Update:
- If a firmware update is available, follow the on-screen instructions to download and install it. The extender may automatically search for updates, or you might need to initiate the process manually.
